Shutting Down The Ex7750 - Xerox Phaser EX7750 Job Management Manual

8
8-6 Using FieryBar

Shutting down the EX7750

You may need to shut down the EX7750 for service. When you do so, fonts that have
been downloaded to the hard disk are not deleted. Print jobs in the Hold and Printed
queues and jobs that have been processed but not printed are not deleted and are
available for printing when you restart the EX7750.
T EX7750
O SHUT DOWN THE
1. Make sure the EX7750 is not receiving, processing, or printing a job.
Make sure that both the RIPping and Printing areas on FieryBar read Idle. If a job has
just finished processing or printing, wait at least five seconds after the RIPping and
Printing areas switch to Idle before proceeding to the next step.
If a job from the Print queue is processing, it will continue processing and print
N :
OTE
after the EX7750 is restarted. If a job sent to the Direct connection is processing, it will
not finish processing or printing.
2. At the Idle screen, press the Menu button to display the Functions menu.
3. Choose Shut Down from the Functions menu.
4. At the next screen, select Shut Down System.
The message
EX7750 shuts down automatically.
If you are going to turn the system back on, wait at least 10 seconds.
N :
OTE
It is now safe to power off the system....
is displayed, and then the