Using Templates - Xerox Phaser EX7750 Job Management Manual

5

5-11 Using templates

T
O USE THE SURFACE MENU
1. Click the Surface menu at the bottom of the window.
2. Enter the number of the sheet surface to display.
3. Click OK or press Enter to go to the specified sheet surface.
Name of current template
When the Go To Surface dialog box appears, the entry box indicates the number of the
sheet surface currently displayed.
Using templates
A saved group of imposition settings is known as a template. A template saves all
current imposition settings, except custom rotations of individual pages on a finished
sheet and the page size setting. You can apply any template to any job, making it easy
to apply layout and printing settings quickly and efficiently.
DocBuilder Pro supplies built-in templates that define settings for commonly used
layouts, such as 2-Up Saddle, 3-Up Trifold Brochure, 4-Up Gatefold, and so on. You
can also create your own templates. For a complete listing of built-in templates, see
Appendix B. For information about creating your own templates, see
templates" on page 6-24.
Both built-in templates and your own custom templates appear in the Template menu.
Apply a template by choosing its name from the Template menu, in the upper-left
corner of the Imposition window. The new settings take effect immediately.
"Managing
Save template
Delete template