Access Levels - Xerox Phaser EX7750 Job Management Manual

3
3-5 Starting up and logging in
A white key icon indicates the EX7750 has never been connected to Command
WorkStation or Command WorkStation LE.
If the EX7750 is already connected, the color of the key icon indicates the level of
access granted:
• Purple indicates Administrator access.
• Orange indicates Operator access.
• Cyan indicates Guest access.
3. Select the Administrator, Operator, or Guest option and click Log In (Command
WorkStation) or Login (Command WorkStation LE).
If you are an Administrator, to use Command WorkStation, you must log on
N :
OTE
with the default password "
a password. For more information about changing the default Administrator password,
see the Configuration
This manual assumes you are logged into the EX7750 as Operator. The following
section discusses the three different access levels in greater detail.

Access levels

The three possible levels of access to Command WorkStation or Command
WorkStation LE are Administrator, Operator, and Guest. To enable maximum
password protection, Administrator and Operator passwords must be specified in
Setup (see the
". If you are an Operator or Guest, you do not need
Fiery.1
Guide.
Configuration Guide).