Showing, Hiding, And Arranging Components - Xerox Phaser EX7750 Job Management Manual

2
2-13 Customizing the graphical interface
T
O SELECT A LAYOUT STYLE
• Choose Layouts from the Window menu, and then choose a layout style from the
submenu that appears.
You can choose one of three preset layouts (Default, Style 1, or Style 2) and three
custom layouts. For a description of the components included with each of the preset
layouts, see page
You can define and change the configurations associated with the three custom layout
styles. For details, see the following section.

Showing, hiding, and arranging components

Use Window menu commands to show or hide window components. You can also
drag components to different locations in the window, and dock components side
by side.
You cannot hide or drag the menu bar and Active Jobs window to different
N :
OTE
locations. These components always appear in the Command WorkStation or
Command WorkStation LE window.
T
O SHOW OR HIDE A COMPONENT
• Choose the command associated with the component from the Window menu.
When a component is displayed, a check mark appears next to it in the Window
menu.
T
O MOVE A COMPONENT TO ANOTHER LOCATION
• Click the window grip (three vertical lines) on the left side of the component's title
bar (Command WorkStation) or click the component's title bar (Command WorkStation
LE), and drag the window to the desired location.
Undocked components float in front of other components and appear with standard
window frames. You can drag the blank title bar of the window to move the
component, or drag the edges of the window to resize the component. You can also
click the window Close box to hide the component.
When the Jobs window is docked, you can resize it vertically by clicking and
N :
OTE
dragging its top edge.
2-19.