Restarting The Ex7750 - Xerox Phaser EX7750 Job Management Manual

8
8-5 Starting and shutting down the EX7750

Restarting the EX7750

Use the following procedure to restart the EX7750 rather than using the power button
on the back panel of the EX7750.
T EX7750
O RESTART THE
1. Make sure the EX7750 is not receiving, processing, or printing a job.
Make sure that both the RIPping and Printing areas on FieryBar read Idle.
If a job from the Print queue is processing, it will continue processing and print
N :
OTE
after the EX7750 is restarted. If a job sent to the Direct connection is processing, it will
not finish processing or printing.
2. Press the Menu button, choose Down from the Functions menu, and then select Restart
Server.
Do not push any buttons while the system restarts.
N :
OTE
3. At the Logon to Windows prompt on the monitor, keep Administrator in the user name
field, enter Fiery.1 in the password field, and press Enter.
The default password is set to Fiery.1. For information about changing the
N :
OTE
password, see the
4. Allow FieryBar to appear and reach Idle on the monitor.
Configuration Guide.