Certifications In Europe; Compliance With Eu Harmonics Standard En 61000-3-12:2005 - Xerox 770 Safety Manual

Certifications in Europe

The CE marking that is applied to this product symbolize the Xerox declaration of
conformity with the following applicable Directives of the European Union as of the
dates indicated:
December 12, 2006: Council Directive 2006/95/EC as amended. Approximation of the
laws of the member states related to low voltage equipment.
December 15, 2004: Council Directive 2004/108/EC as amended. Approximation of the
laws of the member states related to electromagnetic compatibility.
A full declaration of conformity, defining the relevant directives and referenced standards,
can be obtained from your Authorized local dealer.
WARNING
• Changes or modifications to this equipment not specifically approved by the Xerox
Corporation may void the user s authority to operate this equipment.
• In order to allow this equipment to operate in proximity to Industrial, Scientific, and
Medical (ISM) equipment, the external radiation from the ISM equipment may have
limited or special mitigation measures taken.
• This is a Class A product in a domestic environment. This product may cause radio
frequency interference in which case the user may be required to take adequate
measures.
• Shielded cables must be used with this equipment to maintain compliance with
Council Directive 2004/108/EC.

Compliance with EU harmonics standard EN 61000-3-12:2005

"Equipment complying with EN 61000-3-12:2005"
This equipment complies with EN61000-3-12:2005 which defines limits for harmonic
currents which may be produced by equipment installed in the European Union and the
European Economic Area.
Compliance is based on application of limits which justify installation and unconditional
connection to the public low voltage supply.
®
Xerox 770 Digital Color Press
Safety Guide
Notices and certifications
1-3