Notices And Certifications; Warning Markings; Radio Frequency Emissions; Fcc In The Usa - Xerox 770 Safety Manual

Notices and certifications

Warning markings

WARNING
This symbol alerts users to areas of the product where there is the possibility of
personal injury.
HOT WARNING
This symbol alerts users to areas of the product where there are heated surfaces,
which should not be touched.
CAUTION
This symbol alerts users to areas of the equipment, which require special attention
to avoid the possibility of personal injury or damage to the equipment.
LASER WARNING
This symbol indicates a Laser is being used in the equipment and alerts the user to
refer to the appropriate safety information.

Radio frequency emissions

FCC in the USA

This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the Federal Communications Commission (FCC) Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his/her own expense.
Changes or modifcations to this equipment not specifically approved by the Xerox
Corporation may void the user s authority to operate this equipment.
®
Xerox 770 Digital Color Press
Safety Guide
1
1-1