Certifications In Europe; Electrical Safety - Xerox Nuvera 100 Getting Started Manual

Certifications in Europe

Compliance with EU Harmonics Standard EN 61000-3-12:2005

Electrical Safety

4
The CE mark applied to this equipment symbolizes Xerox's
declaration of conformity with the following applicable Directives of the
European Union as of the dates indicated:
December 12, 2006 Council Directive 2006/95/EC as amended.
Approximation of the laws of the member states related to low voltage
equipment.
December 15, 2004 Council Directive 2004/108/EC as amended.
Approximation of the laws of the member states related to
electromagnetic compatibility.
A full declaration of conformity, defining the relevant directives and
referenced standards, can be obtained from your Authorized local
dealer.
: Changes or modifications to this equipment not specifically
WARNING
approved by the Xerox Corporation may void the user's authority to
operate this equipment.
: In order to allow this equipment to operate in proximity to
WARNING
Industrial, Scientific, and Medical (ISM) equipment, the external
radiation from the ISM equipment may have limited or special
mitigation measures taken.
: This is a Class A product in a domestic environment. This
WARNING
product may cause radio frequency interference in which case the user
may be required to take adequate measures.
: Shielded cables must be used with this equipment to
WARNING
maintain compliance with Council Directive 2004/108/EC.
"Equipment Complying with EN 61000-3-12:2005"
This equipment complies with EN 61000-3-12:2005 which defines
limits for Harmonic currents that may be produced by equipment
installed in the European Union and the European Economic Area.
Compliance is based on application of limits that justify installation
and unconditional connection to the public low voltage supply.
Use only the power cord supplied with this equipment.
Plug the power cord directly into a correctly grounded electrical outlet.
Do not use an extension cord. If you do not know whether or not an
outlet is grounded, consult a qualified electrician.
Do not use a ground adapter plug to connect this equipment to an
electrical outlet that lacks a ground connection terminal.
: You may incur a severe electrical shock if the outlet is not
WARNING
grounded correctly.
Xerox Nuvera Getting Started Guide