Axis Q6035-C User Manual page 54

AXIS Q6035-C PTZ Dome Network Camera
Troubleshooting
Poor quality snapshot images
Screen incorrectly
configured on your computer
Overlay image is not displayed
Incorrect size or location of
overlay image
Privacy mask is not displayed
Incorrect size or location of
privacy mask
Browser freezes
Firefox can sometimes
freeze on a slow computer
Problems uploading files
Limited space
Motion Detection triggers unexpectedly
Changes in luminance
Storage and disk management problems
Video cannot be recorded
SD card cannot be mounted
Focus, zoom, and fan
Remote focus and zoom do
not work
Fan cannot be activated
Media converter switch
Media converter switch
freezes after hotswapping
Configure your screen to show at least 65000 colors, that is, at least 16 bits. Using only 16 or 256
colors will produce dithering artifacts in the image.
The overlay image may have been positioned incorrectly or may be too large. See Overlay Image
Settings in the online help for more information.
The privacy mask may have been positioned incorrectly or may be too large.
Lower the image resolution
There is only limited space available for the upload of your own files. Delete existing files to free
up space.
Motion detection is based on changes in luminance in the image. This means that if there are
sudden changes in the lighting, motion detection may trigger mistakenly. Lower the sensitivity
setting to avoid problems with luminance.
Check that the SD card is not write protected (that is, read only).
Reformat the SD card and then click Mount.
In subzero temperatures, function in these hardware parts is suspended until the camera is heated
to approximately 0 °C (32 °F)
In subzero temperatures, function in this hardware part is suspended until the camera is heated to
approximately 0 °C (32 °F)
The media converter switch does not support hotswapping. Disconnect power from the switch
before swapping cameras. Restart the switch after a failed attempt to hotswap.
54