Table of Contents
Advertisement
AXIS Q6035-C PTZ Dome Network Camera
Accessing the Product
Configure Capture Mode
Capture mode defines the maximum resolution and maximum frame rate available in the Axis product. The capture mode setting also
affects the camera's angle of view; if using a capture mode with a smaller maximum resolution, the angle of view is reduced.
Select the desired capture mode from the drop-down list and click OK.
See also Capture Mode, on page 21.
The Live View Page
The controls and layout of the Live View page may have been customized to meet specific installation requirements and user
preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View
page. The following provides an overview of each available control.
Controls on the Live View Page
The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream
profiles are configured under Video > Stream Profiles. See Stream Profiles, on page 20.
The Manual Trigger button is used to trigger an action rule from the Live View page; see page 13. Enable this
button from Live View Config > Action Buttons.
Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your
computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available.
Enable this button from Live View Config > Action Buttons.
Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. See page 29 for more information
about Gatekeeper.
12
Advertisement
Table of Contents
