MAINTENANCE WORK ON CHASSIS AND ENGINE
Checking the rear brake linings
9.60
Warning
Danger of accidents Reduced braking efficiency caused by worn brake linings.
–
Change worn brake linings immediately. (Your authorized KTM workshop will be pleased to help.)
Removing rear brake linings
9.61
Warning
Danger of accident Brake system failure.
–
Maintenance work and repairs must be carried out professionally. (Your authorized KTM workshop will be pleased to help.)
Installing the rear brake linings
9.62
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Info
Clean up overflowed or spilt brake fluid immediately with water.
–
Mount and tighten the screws.
–
Check the brake linings for minimum thickness
Minimum thickness
»
If the minimum thickness is less than specified:
–
Change the rear brake linings.
–
Check the brake linings for damage and cracking.
»
If damage or wear is encountered:
–
Change the rear brake linings.
700424-01
x
–
Remove the rear wheel.
–
Remove lock washer
–
Remove screw
700428-01
–
Remove the brake linings.
–
Clean brake caliper and brake caliper support.
700430-01
x
≥ 1 mm (≥ 0.04 in)
(
x
x
(
(
p. 46)
x
.
.
.
p. 44)
p. 44)
43