Removing The Fork Legs; Installing The Fork Legs - KTM 65 XC 2009 Owner's Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE

Removing the fork legs

x
9.19

Installing the fork legs

x
9.20
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
Guideline
Screw, top triple clamp
–
Check play of steering head bearing. (
–
Remove the front wheel.
–
Remove screws
–
Remove screws
–
Hang the brake caliper and the brake line loosely to the side.
300663-10
–
Loosen screw
–
Loosen screw
300664-10
–
Position the fork legs.
Info
Position the bleeder screw
300665-10
–
Adjust the fork overhang.
Guideline
Upper triple clamp flush with end of
outer tube
Upper triple clamp flush with 1st ring
Upper triple clamp flush with 2nd ring
Upper triple clamp flush with 3rd ring
Info
700533-01
The setting of the vehicle level via the fork legs must be identical on both
fork legs.
p. 25)
( p. 45)
x
and take off clamp.

and take off brake caliper.

. Remove the left fork leg.

. Remove the right fork leg.

to the front.

M8 25 Nm
(18.4 lbf ft)

Standard



26