System Parameters
Allows you to set parameters affecting the operation of the whole
system:
Cycle rate
Specifies how often the boiler will switch on and off in any given
hour. measured as cycles per hour. A typical cycle rate is 6
cycles per hour, giving a 10 minute cycle length.
Off temperature
Specifies the temperature that the system will revert to when the
system is turned off, for frost protection.
Holiday temperature
Specifies the temperature set throughout all zones when the
user selects Holiday mode:
Internal sensor offset
Specifies the offset of the internal sensor temperature, when the
unit is placed in a location where the measurement needs to be
corrected:
8
Min. boiler on time
Specifies a minimum on time for the heat source, to ensure all
the heat is dissipated from the system before shutting off.