Mixing valve settings
The following settings are available for the Mixing Valve
application:
Pump run time
Pump Run time (or pump overrun) specifies how long the pump
in the heat source needs to keep running to extract all the heat to
avoid blocking the heat source:
Zone valves options
The following options are available for the Zone Valves
application:
Actuator running time
Specifies the amount of time to open/close the actuator, in the
range 0 to 100%.
Min flow temp, Max flow temp
The min/max flow temperature are limits to control the flow
temperature to achieve the target room temperature setpoint and
protect the heating system:
Min. Max. Setpoint
See Min. Max. Setpoint, page 6.
Fail safe
Specifies that the HC60NG/BDR90 output relay should switch
OFF if the RF communication is lost:
Min. Max. Setpoint
See Min. Max. Setpoint, page 6.
7