Safety Information; Approvals; Emc Compliance Considerations - Honeywell EVOTOUCH CONTROLLER Installation Manual

Hide thumbs Also See for EVOTOUCH CONTROLLER:
Table of Contents

Advertisement

Safety information

Approvals

Conforms to protection requirements of the following directives:
EMC: 2004/108/EC
LVD: 2006/95/EC
R&TTE: 1995/5/EC

EMC compliance considerations

Refer to Code of Practice standards EN61000-5-1 and -2 for
guidance.
Caution: Isolate power supply and make safe before wiring the
unit to prevent electric shock and equipment damage. Installation
should be carried out by a competent person.
Product handling
Care should be taken with the evotouch unit while it is out of its
dock or table-top stand as the unit, particularly the touchscreen
display, may be damaged if the unit is dropped onto a hard
surface.
Location of device
evotouch should be placed in an open space for best
performance as it is a radio frequency device. Leave at least
30cm distance from any metal objects including wall boxes and
at least 1 metre from any other electrical equipment eg. radio,
TV, PC etc. Do not mount onto metal wall boxes.
For the best temperature control performance evotouch should
not be placed near heat or cool sources (e.g. cooker, lamp,
radiator, doorways, windows).
Disclaimer
This product and its associated documentation and packaging
are protected by various intellectual property rights belonging to
Honeywell Inc and its subsidiaries and existing under the laws
of the UK and other countries. These intellectual and property
rights may include patent applications, registered designs,
unregistered designs, registered trade marks, unregistered trade
marks and copyrights.
Honeywell reserves the right to modify this document, product
and functionality without notice. This document replaces any
previously issued instructions and is only applicable to the
product(s) described.
This product has been designed for applications as described
within this document. For use outside of the scope as described
herein, refer to Honeywell for guidance. Honeywell cannot be
held responsible for misapplication or the product(s) described
within this document.
PLEASE RESPECT YOUR ENVIRONMENT!
Take care to dispose of this product and any packaging or
literature in an appropriate way.
10
WEEE directive 2002/96/EC
Waste Electrical and Electronic
Equipment directive
• At the end of the product life dispose of the packaging and
product in a corresponding recycling centre.
• Do not dispose of the unit with the usual domestic refuse.
• Do not burn the product.
• Remove the batteries.
• Dispose of the batteries according to the local statutory
requirements and not with the usual domestic refuse.
Manufactured for and on behalf of the
Environmental and Combustion Controls
Division of Honeywell Technologies Sàrl,
ACS-ECC EMEA, Z.A. La Pièce 16,
1180 Rolle, Switzerland by its Authorised
Representative Honeywell Inc.
Honeywell Control Systems Ltd.
Arlington Business Park,
Bracknell, Berkshire
RG12 1EB
Technical Help Desk: 08457 678999
www.honeywelluk.com

Advertisement

Table of Contents
loading

Table of Contents