Underfloor heating setting
The following setting is available for the Underfloor Heating
application:
Min. Max. Setpoint
This specifies the minimum and maximum temperature that can
be requested for the zone:
• Use the controls to set the minimum and maximum setpoints,
and press DONE.
Radiator heating settings
The following settings are available for the Radiator Heating
application:
Optimisation setting
Allows the HR80 to perform its own optimisation calculation
locally using the desired set point, measured temperature, and
comfort schedule:
6
Window function
Enables the function built into the HR80 that detects when a
window is open (by measuring a drastic drop in temperature)
and automatically closes the radiator valve for a certain time for
energy saving:
Min. Max. Setpoint
See Min. Max. Setpoint, on this page.
Local override
Allows the setpoint to be changed at the HR80. This is valid until
the next switching point: