Table of Contents
Advertisement
30. Adjusting
the door opening
angle
Depending
on the installation
situation,
it may be
necessary to adjust the door opening angle. A door
opening
angle of 115 ° has been set at the factory.
To adjust the door opening angle to 90°:
Q
Open door to 90 ° .
31. Changing
the door spring
To adjust the door spring:
Rotate the adjusting
screw with a cross-head
screwdriver.
I -- maximum
spring tension
0 -- no spring tension
I_i
Insert the banking pin through
the boreholes
which
are now vertically aligned and drive in with
a hammer.
41
Advertisement
Table of Contents
