Table of Contents
Advertisement
I_
Put the mains plug into the socket.
IT]In
the case of Side-by-Side
appliances
a separate
socket must be used for each appliance.
I_
Prevent the power cord from becoming
caught.
Tie a piece of string to the middle of the power cord
and feed forwards
under the appliance. When
pushing
in the appliance,
pull the cable forwards.
Or
Using adhesive tape, stick the power cord to the
floor centrally behind the appliance
approx.
15"
(380 mm) away from the rear panel of the cavity.
Carefully push the appliance
into the cavity until
the height-adjustable
wheel interlock
with the
anti-tip brackets.
12. Installing
and
appliance
aligning the
I_
Remove edge protection.
%
Align the appliance
with the furniture fronts.
Place marking-out
level over the installation
aid
parts on the door.
The installation
aid parts on the door have been
designed
for the following total thickness
of furniture
doors:
_ 3A,,(19 mm)
- 11/2" (38 mm)
Always take account
of the possible differing
thickness
of the furniture fronts which are to be
fitted subsequently.
26
Advertisement
Table of Contents
