Attaching The Furniture Door - Thermador T24IF70NSP/99 Installation Instructions Manual

13 Remove the furniture door.
22. Attaching the furniture door
IT] Now fit the furniture handles which are screwed
from behind!
13
13
Using the positioning aid, set both longitudinal sides
of the furniture door parallel.
Using a square, extend the drill hole marks which
you have just made to the vertical marks.
13 Mark and drill the holes.
4x15
13
13
13
13
Hang the furniture door with adjusting rail over the
double threaded bolts.
Screw the nuts a little onto the double threaded
bolts. Do not tighten!
Precisely adjust the furniture door.
To do this, insert the bracket directly behind the
furniture handle into the associated fixing plate.
Slide the bracket onto the screw on the appliance
door and tighten.
Align the furniture door with the double threaded
bolts (Torx screwdriver). Then loosen the bracket
screw again.
After erecting the appliance, remove the fixing
plates again!
Align the furniture door, checking the clearance all
the way round. If required, move the adjusting rail to
the left or right.
13 Screw on the fixing plates (10x).
34