Table of Contents
Advertisement
3.
Removing
the packaging
- The appliance
may tip over while it is being
unpacked.
-The
appliance
is very heavy.
-When
opening the appliance
door, the appliance
may tip forwards.
Be careful, otherwise
people who are helping may be
injured or the appliance
may be damaged.
To protect the base from damage
during installation:
I_
Attach a residual piece of carpet,
lino, etc. to the
floor with adhesive tape in front of the intended
installation
location.
B
(3
Preparing
the appliance
Remove the side brackets and fixing plates which
attach the furniture fronts.
To do this, loosen the fastening
screws and remove
the stop parts.
-i-] Store the stop parts in suitable receptacles,
otherwise
they may get lost.
I_
Move the appliance
with a hand truck securely.
I_
Remove transportation
packaging:
-
Remove the cartoon.
Use the cutter securely to
protect the surface of appliance.
-
Take supplied
accessories
out of protection
parts of packaging.
Do not remove transportation
safety devices which
protect the shelves and storage compartments
inside
the appliance
until the installation
is complete,
otherwise
the parts may be damaged.
(3
Check appliance
for damage
in transit.
Do not install the appliance
if it is visibly damaged.
If in doubt, contact your dealer.
19
Advertisement
Table of Contents
