Download Print this page

Whirlpool WDF550SAAS0 Installation Instructions Manual page 4

Undercounter dishwasher
Hide thumbs Also See for WDF550SAAS0:

Advertisement

Available languages

Available languages

Installation Clearances
Cutout Dimensions
)_611
(15.2cm)
/
(61cm)
&
_
24
maximum
-,q--
A. All surfaces free from intrusions
34"to 35"
(86.4cmto 88.9cm)
_.24"
(61 cm)
minimum
* Underside of countertop to floor
NOTES:
Cut holes in shaded area of cabinet walls or floor for plumbing
and electrical service.
ADA installation--321/2 '' (82.5 cm) beneath 34" (86.4 cm) high
countertops
may be accomplished
by adjusting the toekick
and leveling legs.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions can result in death,
fire, or electrical
shock.
GROUNDING
iNSTRUCTiONS
For a grounded, cord-connected
dishwasher:
The dishwasher
must be grounded.
In the event of a
malfunction
or breakdown,
grounding
will reduce the
risk of electric shock by providing
a path of least
resistance
for electric current. The dishwasher
is
equipped
with a cord having an equipment-grounding
conductor
and a grounding
plug. The plug must be
plugged
into an appropriate
outlet that is installed and
grounded
in accordance
with all local codes and
ordinances.
WARNING:
Improper connection
of the
equipment-grounding
conductor
can result in a risk of
electric shock. Check with a qualified electrician
or
service representative
if you are in doubt whether the
dishwasher
is properly grounded.
Do not modify the
plug provided with the dishwasher;
if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
For a permanently
connected
dishwasher:
The dishwasher
must be connected
to a grounded
metal, permanent wiring system, or an equipment-
grounding
conductor
must be run with the circuit
conductors
and connected
to the equipment-
grounding
terminal or lead on the dishwasher.
SAVE THESE iNSTRUCTiONS
Contact a qualified electrician.
Ensure that the electrical installation is adequate and in
conformance with all national and local codes and ordinances.
Requirements:
120-volt, 60 Hz, AC-only, 15- or 20-amp fused electrical
supply
Copper wire only, 2 wire with ground
Recommended:
Time-delay fuse or circuit breaker
Separate circuit
Direct Wire Connection
Use flexible, armored or nonmetalic sheathed, copper wire
with grounding wire that meets the wiring requirements for
your home and local codes and ordinances.
Power Supply Cord Connection
Use Power Supply Cord Kit (Part Number 4317824) marked for
use with dishwashers. Kit contents include:
UL listed 16 gauge 3-wire power supply cord with
3 prong grounding plug
Neer C-500 7/8"strain relief
3 wire connectors
Part No. 302797 grommet
Follow the kit instructions for installing the power supply cord.
NOTE: Power supply cord must plug into a mating three prong,
grounded outlet, located in the cabinet next to the dishwasher
opening. Outlet must meet all local codes and ordinances.
IMPORTANT: If you plan to install a garbage disposal, an
additional separate 120-volt, 60 Hz, AC-only, 15- or 20-amp fused
electrical supply is required.

Advertisement

loading

This manual is also suitable for:

Wdf550saaw0Wdf550saab0Wdf550saawWdf550saabWdf550saas