Advertisement
4 Use the operation button
a
Description of operation button
Indicator mode and meaning
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
"START/PAUSE" button
After the power is switched on, press it to
start the machine
During working, push it to pause.
During pause, push this button to restart
and go on working
"SOAK "button
"WASH/SPEED " button
Press the Wash button to select a
Press the Soak button to select a soak
procedure.
wash
procedure
.
The button can be used to select
The button can be used to select the
the desired wash time( 0,6,9,12,15
desired soak time( 10, 20 minutes)
minutes) from the Normal and
from the Normal and Comforter
programs.
Jean program.
The button is unavailable from the
The button is unavailable from the
Saving,quickwash,posthaste Standard,
Saving,Speedily, Standard, Woollen,
Carpet, Woollen programs.
Carpet and Delicate programs.
For the Normal Jean program,
press the button for 2 seconds to
start wash speed selection. The
speed from 1 to 4 is available for
selection. The default value is 2.
Wash/spin
Wash
Rinse
Spin
speed
•
Soak
•
Overflow
SPIN
SPEED
"SPIN/SPEED " button
"
RINSE button
"
Press the Spin/Speed button to
Press the Rinse button to select a
select a spin
procedure
.
rinse
procedure
.
The button can be used to select
The button can be used to select
the desired spin time(1,3,5,7
the desired number of rinse cycles,
minutes )from the Normal program
(0, 1, 2 , 3 times )from the Normal
or the Jean program.
program or the Jean program.
The button is unavailable from the
While the
"Overflow" digitron is
Saving,quickwash,posthaste Standard,
lighting,the program of the overflow
Carpet, Woollen programs.
rinse has been selected.
For the Normal or Jean program,
The button is unavailable from the
press the button for 2 seconds to
Saving,quickwash,posthaste Standard,
start spin speed selection. The
Carpet, Woollen programs.
speed from 1 to 4 is available for
selection. The default value is 2.
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1.
Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
nut of the water
inlet hose
jointer of the
water absorption
water inlet valve
cushion.
the jointer of the
water inlet hose
Locking level
Slider
Locking level
Slider
Advertisement
