Table of Contents
Advertisement
4 Press the "WATER LEVEL" button to select
suitable water level
After switching on the power, press the button "WATER LEVEL" to select a water level according
to the load. Please refer to the button " Water level" on page 10.
5 Push the " RESERVATION/CALEFACTION"
button to select suitable reserv e progra m
After switching on, the washing machine reserved wash program will be automatically set
i nactive. If you desire a wash cycle to end at a reserved time, you can press the
"
RESERVATION/CALEFACTION
Refer to The button of
Confirm the reserve program
When "Reservation" becomes active, the nixie tube displays the time
to the end of the reserved wash cycle, and the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
Confirm the heating function
Keep pressing the
the heating indicator turns on (red).
Keep pressing the
heating indicator turns off and heating function is cancelled.
After the machine starts running, if selection or cancellation of heating function
is desired, you should switch off the power and reselect.
6 Press the "start/pause" button
Close the top lid
Except water filling (excluding heating function) and draining process,
if the top lid is opened, the machine will stop running and alarm.
Finish washing
The washing machine cuts off the power supply automatically when wash cycle ends.
"
button to set a reserved wash program.
"
RESERVATION/CALEFACTION
"
RESERVATION/CALEFACTION
"
RESERVATION/CALEFACTION
14
"
on page 11.
Page 11
the washing will finish
about 18 hours later
"
button for more than 2 s,
"
button for more than 2 s again, the
WATER
LEVEL
SELECTION
Page 10
RESERV
ATION
CALEFACTION
START
PAUSE
Advertisement
Table of Contents
