Table of Contents
Advertisement
How to change the direction of the drain hose
1
Dismount the back cover of the washing
machine.
Figure 1
2
Take off the drain hose frame. Put down
the drain hose. Take off the drain hose rack.
As indicated in Figure 1 Pull the drain hose
into the cabinet from the left side of the bottom
(as figure 2).
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position. Do not
put it on ground
Notes: the highest point of drain pipe should be higher
than the water level of washing tub for avoiding
to siphon phenomenon during drain.
3 protrude the drain hose from the hole
drain hose rack
The highest point
5
on the right side of the bottom, and fast
it onto the bottom with the rack and screws.
Set the bracket on the drain hose .There
is a hole on the cabinet to hang the drain
hose (as figure 3).
4 install the back cover as what it looks
before.
2.Do not step on or press the
drain hose.
Figure 3
Figure 2
Advertisement
Table of Contents
