Table of Contents
Advertisement
Trouble-shooting Answers to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.
The reason
Phenomena
Is there power failure?
Is the power plug loose?
The machine does
Is the pulsator twisted by
not function.
foreign materials?
Has the drain hose being
laid down?
The draining does
Is the drain hose blocked
by foreign material?
not function
Are there any laundries
trapped at the outer side
of the spin tub?
Are there hair pin, coins
There's abnormal
or metal items brought
sound during
inside the tub?
washing
Is the machine slanting?
There's abnormal
Is the gland pressed evenly?
sound and violent
Are there any laundries trapped
vibration during
at the outer side of the spin tub?
spinning
Are the laundries in spin tub over
loaded?
Specification
°
Rated voltage frenquency
Water level Water quantity estimated (L)
Largest washing capacity(kg)
Standard washing capacity(kg)
Standard spinning capacity(kg)
Injection pressure(MPa)
*
Specifications may be subject to change
without prior notice
How to settle
Use it when the power is on.
Insert the power plug tightly.
Remove the foreign materials?
Put down the drain hose?
Remove the foreign material?
Please contact the after-sales
service department.
Remove the hair pin, coins or
metal items
Pressed the gland evenly
Level the machine properly.
Remove the laundries
Remove a little laundries
220V-240
50Hz
Maximum/48 Medium/39 Minimum/33
6.5(HWM65VA) 6.8(HWM68VA)
6.0
4.5
0.02~0.2
14
USER
WASHING MACHINE
SEMI AUTO WASHING MACHINE
HWM65VA
HWM68VA
Manual
CONTENTS
Packing list
Names of the parts
Safety precautions
Installation and adjustment
Preparation before washing
Do s and don ts
Usage of the detergent
Washing sequence
Maintenance
Trouble-Shooting Answers to question
Specification
0030807643
Advertisement
Table of Contents
Related Manuals for Haier HWM65VA
Summary of Contents for Haier HWM65VA
-
Page 1: User Manual
50Hz Do s and don ts Maximum/48 Medium/39 Minimum/33 Usage of the detergent Water level Water quantity estimated (L) Washing sequence Largest washing capacity(kg) 6.5(HWM65VA) 6.8(HWM68VA) Maintenance Standard washing capacity(kg) Trouble-Shooting Answers to question Specification Standard spinning capacity(kg) Injection pressure(MPa) 0.02~0.2... -
Page 2: Packing List
Packing list protective cover Cleaning the Quantity Name 2.cleaning dirty under the protective cover One piece User's manual take out the sundries using the plier or other wiry One piece Warranty card 3.install the protective cover after cleaning, install it as origin assure it reliable One piece Water inlet hose One piece... -
Page 3: Names Of The Parts
Names of the parts Cleaning the overflow filter 2. Take off the corrugation pipe. Water level Wash selector Dismantle the upper part of the adjusting lever corrugation pipe inside Wash timer overflow filter ( as indicated in Corrugation Outer cover of the spin tub Figure 1 Water inlet Pipe... -
Page 4: Safety Precautions
Safety precautions Maintenance Please insert the power cord into When the machine is normally After using, please clean the lint and eyewinker of the lint filter and special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- overflow filter in time. -
Page 5: Safety Precautions
Safety precautions Rinsing Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of Rinse with stored water the children. (Repeat the midway spinning and rinsing with stored water for 2-3 times) 1. -
Page 6: Installation And Adjustment
Installation and adjustment Please install and adjust the machine according to the requirement of Midway spinning the manual. It is very important to your security and correct operating the machine. 1.Put the laundries into the spin tub evenly and smoothly. Install the lint filter 2.Spin (1) Put the gland in properly. -
Page 7: Washing Sequence
Washing sequence How to change the direction of the drain hoses Figure 1 indicates the ex factory installation position of the drain hose. Soft item Wash selector Spin timer Wash timer (To set to below 2 minute, (Strong current, (to set to below 1 minute, WATER INLET first set to 5 minute then standard current) -
Page 8: Preparation Before Washing
Do s and Don ts Preparation before washing The capacity of washing and spinning of the Preparation before washing machine refer to the weight of the 1.Connect the water inlet hose. standard laundries under dry condition that can be washed or spinned in one time. Laundries 2.Confirm that the washing machine is earthed quantity in one washing cycle shall be lower reliably .
Need help?
Do you have a question about the HWM65VA and is the answer not in the manual?
Questions and answers