Changing The Initial Settings With The Preference Screen; Basic Operations; Language - JVC NX-F7 Instructions Manual

NX-F3_NX-F7[A]EN.book Page 38 Tuesday, April 22, 2008 1:55 PM

Changing the initial settings with the preference screen

You can use the preference screen to change the
initial settings of the main unit according to the
environment where the main unit is used.
■ IMPORTANT
• Slide the remote control mode
selector to [SHIFT].
NOTE
• The top and bottom of the preference screen
may not be displayed on a widescreen TV.
Adjust the picture size on the TV.

Basic operations

■When a disc/file is stopped or no disc is
1
Remote control
mode selector
2
5///2/3
(cursor)/
ENTER
NOTE
• It is recommended that you slide the remote
MENU

LANGUAGE

AUDIO
LANGUAGE
SUBTITLE
ON SCREEN
LANGUAGE
NOTE
• If the selected language is not recorded on the
• For a language code such as "AA", refer to the
loaded ("NO DISC" is displayed in the dis-
play window)
Press [SET UP].
• The preference screen appears on the TV
screen.
Use 5, /, 2, 3 (cursor) and
[ENTER] to operate the preference
screen.
• Follow the description on the TV screen to
operate the preference screen.
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
LANGUAGE
Items Contents
Select the language for the DVD
VIDEO menu screen.
Select the audio language for the DVD
VIDEO.
Select the subtitle language for the
DVD VIDEO.
Select the language displayed on the
preference screen.
disc/file, the optimum language set for the disc/
file is displayed.
"Language codes" on page 41.
38