Changing The Display And Control Buttons Settings - JVC VS-DT2000 Instructions Manual

Getting Started
Now you can plug the AC power cord into the wall outlet, and your System is at your
command!
Before operating, verify that the display shows the clock. If malfunctions may occur, re-
connect the power cord.

Changing the Display and Control Buttons Settings

You can change the direction of the characters and symbols on the display and the assignment of the functions to each control
button on the Unit. Change the settings depending on whether the Unit is placed vertically or horizontally. The factory setting
is "V".
When the Unit is placed vertically
Set the DISP.SET switch to "V".
H V
DISP.SET
SOURCE PRESET
SOURCE PRESET VOL
COMPACT COMPONENT SYSTEM
CAUTION:
• Be sure to turn off the System when changing the settings.
11
DISP.SET
SPEAKERS
H V
R L
DISP.SET
SPEAKER IMPEDANCE 4 16
VOLTAGE SELECTOR
110V 127V 230V
AC IN
When the Unit is placed horizontally
Set the DISP.SET switch to "H".
H V
DISP.SET
VOL
C O M P A C T C O M P O N E N T
ANTENNA
FM
(75 )
COAXIAL
AM
LOOP
CD DIGITAL
OUT
SUB MD/AUX
WOOFER
OUT IN
AM
EXT
SOURCE PRESET
SOURCE PRESET VOL
S Y S T E M
VOL