JVC NX-F7 Instructions Manual page 33

NX-F3_NX-F7[A]EN.book Page 30 Tuesday, April 22, 2008 1:55 PM
2
Press the number buttons to pro-
gram tracks/chapters.
• You can refer to the program number in the
display window by pressing [DISPLAY].
Display for a DVD VIDEO
• Select a title number, and then a chapter
number.
Title number Chapter number
Program number Chapter number
Display for a DVD AUDIO/MP3/WMA/WAV
file
• Select a group number and then a track
number.
.
Group number Track number
Program number Track number
Display for a VCD/SVCD/CD
• Select a track number.
• As you finish the track selection, the total
time for the program playback is displayed.
.
Track number
Program number Track number
[DISPLAY] is pressed.
[DISPLAY] is pressed.
Total playback time
[DISPLAY] is pressed.
Example: TV screen for a DVD VIDEO
(Program screen)
• Before selecting a bonus group of a DVD
AUDIO, cancel the "BONUS" indicator as
explained in "Playing back the bonus group"
on page 34.
NOTE
• Instead of using the number buttons, when you
press [ENTER] in the "Track/Chapter" column on
the TV screen, "ALL" appears and all the chap-
ters/tracks in the selected title/group are pro-
grammed. (Only for a DVD VIDEO/DVD AUDIO/
MP3/WMA/WAV file)
• You can erase the programmed tracks one by
one from the bottom of the list on the program
screen by pressing [CANCEL] repeatedly.
• You can erase the whole program by holding
down [CANCEL].
• Opening the disc tray also erases the program.
3
Press [DVD 3] or 3 (playback).
Confirming the program
■When a disc/file is played back
Press 7.
• Playback stops and the program screen appears
on the TV screen.
Canceling program playback
■When a disc/file is stopped
Press [PLAY MODE] repeatedly to dis-
play an item other than "PROGRAM"
in the display window.
• This operation does not erase the program.
30