Disposal After Washing - Haier XQB70-10 User Manual

Time list of each program (minute)
Water
Program
level
1~10
Standard
Jeans
1~10
Gentle About 4
Quick
1~10
Total time: including the normal water inlet time, drain time, excluding the power off time. The
total washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing.
The Standard or Jeans program could combine the process of soak during which the washing
machine firstly soak for about 15~45 min after water filling and then begins to wash.
When "Quick wash" program is chosen, the washing machine would automatically set water
level and full processes of wash, rinse and spin.
5 Push the "Reservation" button to select
suitable reserve program
After switching on, the washing machine reserved wash program will be automatically set
inactive. If you desire a wash cycle to end at a reserved time, you can press the
button to set a reserved wash program. Refer to
Confirm the reserve program
"
When Reservation
displays the time to the end of the reserved wash cycle, and
the indicator turns on.
To change the running program or cancel the reservation,
you should cut off the supply and reselect.
6 Press the "start/pause" button
5 Close the top lid
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
6 Finish washing
The washing machine cuts off the power supply
automatically when wash cycle ends.
Wash Rinse
(min) (min)
Rinse twice,each about 4
Rinse twice, each abut 4
About 3
Rinse once, about 4
Rinse twice, about 4
About 3
"
becomes active, the nixie tube
Using process
Using process
Spin
(min)
About 6
About 5.5~6.5
About 2
About 2
"
The button of Reservation
the washing will finish
about 18 hours later
Total time(min)
About 35~47
About 35~48
About 10
About 24
Reserve
" "
Reservation
"
on page 11.
Start
Pause
After Finishing wash
alarm automatically