Disposal After Washing - Haier HWM85-9288 User Manual

Disposal after washing

Please first pull off the power plug from the receptacle before cleaning.

After using, please clean the lint and foreign materials of the lint filter and

overflow filter in time. Otherwise it may influence your using the machine.
Clean the detergent box and set it on the control panel seat.
1
The method of
dismantle: Push it up
aslant and gently.
Cleaning the lint filter
1
Push down the spring
piece of the top lint filter
to make the claws out of
the filter cover, and then
pull out the lint filter to
get it down.
3
Put the lint filter into filter
cover, and make it tight .
The filter screen of the water inlet valve is likely to be blocked by foreign materials and

influence the water inlet. Please clean it with brush every two
months.
If the cabinet is dirty, wipe it with wet cloth

Do not flush it directly with water.

Wipe it with neutral detergent.

Do not wipe it with thinner, petrol, alcohol etc.

After washing, close the water faucet.

( If needed, you can dismantle the water inlet hose).
Do not store water in the washing machine for a long period.

Drain the water completely after each using.
Be sure to pull off the power plug before maintenance.

Hang up the power cord.

Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid

for some time ( about 1 hour), then close the top lid.
2
The method of install :
install it upwards and
aslant and push it in.
2
Pull the back of the lint
filter, and then you can
get down it off the front
cover of the lint filter.
Sweep the rubbish in the
lint filter.
Put the back of the lint
filter into the front cover .
4
Make sure the lint filter
well installed, or it can
influence your use.
Notes:
l
P e t r o
T h i n n e r
Alcoho
14