Anual Verview; Perational Verview - PSC HS1250, User Manual

International symbols are used throughout this manual to provide a
simple visual indication of the information being discussed. In most
cases, each topic's name is preceded by a simple graphic.
For example
Appendix A, Symbol Definitions, shows all the symbols used in this
manual and describes their meaning. These symbols come from the
International Electrotechnical Commission (IEC) Publication 417G,
Graphical Symbols for Use on Equipment.
The scanner has three operational states: Normal Mode, Sleep Mode
and Programming Mode.
N M
ORMAL ODE
Normal Mode is the scanner state when it reads barcodes and sends
label data to the host. When the scanner is idle in Normal Mode for a
prolonged period of time, it transitions into Sleep Mode to conserve
power and prolong scanner life.
S M
LEEP ODE
Sleep Mode is the term used to describe the scanner's condition after
the motor and/or laser have automatically switched off due to a
prolonged period of inactivity.
P
ROGRAMMING
Entering Programing Mode allows you to change scanner features
such as the speaker volume, scanner to host interface parameters,
barcode symbologies, and laser and motor time-outs. When the
scanner is in Programming Mode, you cannot scan normal barcodes
and the scanner will not send data to the host.
A Programming Kit for the HS1250 is available from PSC or your
dealer or distributor. Ask for part number R44-1340.
4
M
ANUAL
is the internationally recognized symbol for a speaker.
O
PERATIONAL
M
ODE
O
VERVIEW
O
VERVIEW
HS1250 User's Guide