Motion Sensor - PSC HS1250, User Manual

The DC power connector is for attaching the AC/DC power supply to
the scanner. This connector supplies +12VDC, -12VDC and +5VDC to
the scanner.
Use ONLY approved AC/DC power supplies
ordered from PSC.
A F
DDITIONAL EATURE
The scanner includes a motion sensor that detects activity in front of
the scan window. Waving your hand or merchandise in front of the
window wakes the scanner up when it is in Sleep Mode. In certain
low level lighting conditions it may be necessary to press the volume
switch to wake-up the scanner. Simply remove the top cover by
using a coin in the coin slot to loosen and lift it, then press the
volume switch to wake the scanner up.
R44-1430
D.C. P C
OWER ONNECTOR
NOTE
M
OTION SENSOR
9