Window Replacement - PSC HS1250, User Manual

W R
INDOW EPLACEMENT
If the scanner's upper window becomes scratched, it can be easily replaced
by following the procedures on this page.
1. Insert a coin into the slot on the scanner's edge and
use it to gently pry the top cover from the scanner.
2. Grasp the top cover firmly and carefully press the
window out from the bottom side. Use care to avoid
dropping the window as it pops loose from the seal
and remember to dispose of it properly.
3. Press one edge of the window against its seal,
aligning the notched corners and ensuring that the
seal is not pinched or rolled.
4. Tilt the window into place, pushing down firmly to
seat the glass along all edges.
5. Clean the windows and replace the top cover as
described under Cleaning.
This completes the window replacement procedure.
1.
26
2.
3. 4.
HS1250 User's Guide