Hookup - PSC HS1250, User Manual

H
OOKUP
1. Route all cables up through the opening.
2. Connect the interface cable to the scanner and secure it
with the mounting screw, ensuring that the cable is routed
inside the cable clip.
3. Attach the DC power connector from the AC/DC power
supply to the scanner's power connector.
4. Connect the IEC power cord to the AC/DC power supply.
You are now ready to power-up the scanner and POS system. Since power-
up procedures vary for different systems, contact the site technical support
specialist, reference the POS system operator's manual, or consult the
manufacturer to ensure that these procedures are performed properly.
R44-1430
1.
3.
2.
4.
15