Honda 2007 INTERCEPTOR VFR800 Owner's Manual page 204

3. Tighten the axle pinch bolt on the left
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
4. Tighten the axle bolt to the specified
torque:
43 lbf·ft (59 N·m , 6.0 kgf·m)
5. Install the right and left brake caliper
onto the fork leg.
To avoid damaging the brake pads,
carefully fits the brake disc ( )
between the pads.
6. Install the right caliper fixing bolts and
tighten to the specified torque:
23 lbf·ft (31 N·m , 3.2 kgf·m)
7. Install the A and B left caliper socket
bolts, and tighten to the specified
torque:
23 lbf·ft (31 N·m , 3.2 kgf·m)
8.
9.
12
10.
If You Have a Flat Tire
Operate the front brake and pump the
fork several times. Check for free
wheel rotation after the brake is
released. Recheck the wheel if the brake
drags or the wheel does not rotate freely.
If the clearances between each surface
of the brake disc and the brake bracket
( ) (not the brake pads) are 13
symmetrical, follow next step.
If the clearances are not symmetrical,
loosen the left axle pinch bolt and pull
the left fork outward or push inward to
adjust the clearance. Then follow the
next step.
Tighten the axle pinch bolt on the right
fork leg to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
Taking Care of the Unexpected
195