4.
Insert the pin spanner ( ) in the
extension bar ( ) provided in the tool
5
kit (page
88
).
5.
Raise the front of the fuel tank (6) and
install the bolt (1) to frame body.
Do not raise the fuel tank higher than the
stopper cable ( ) allows.
7
6.
Place the base of the extension bar over
the installed bolt and position the pin
spanner so that it supports the fuel tank.
When raising the fuel tank, be careful not
to allow the collars fall down.
4
Raising the Fuel Tank
RIGHT SIDE
(6)
(7)
(4) pin spanner
(5) extension bar
(6) fuel tank
(7) stopper cable
Servicing Your Honda
(4)
(5)
99