Controls & Features
Start Button
The start button ( ) is used for starting the
1
engine. Pushing the button in starts the
engine. See
Starting Procedure,
When the start button is pushed, the starter
motor will crank the engine; the headlight
will automatically go out, but the taillight
will stay on.
The starter motor will not operate if the
engine stop switch is in the OFF position
or the ignition switch is in the
position when the start button is pushed.
36
Instruments & Controls
Engine Stop Switch
RIGHT HANDLEBAR
page
54
.
(1) start button
(2) engine stop switch
The engine stop switch ( ) is used to stop
(hazard)
the engine in an emergency. To operate,
push the switch to the OFF (
The switch must be in the RUN (
position to start the engine, and it should
normally remain in the RUN (
position even when the engine is OFF.
(2)
(1)
OFF
RUN
2
) position.
)
)