Honda 2007 INTERCEPTOR VFR800 Owner's Manual page 101

Rear Seat Cover
Removal
1. Removal can be done in the reverse
order of installation.
The grab rails should be installed for
riding with a passenger.
2. Tighten the grab rail mounting bolts (2)
to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly. The
grab rails could come off easily and result
in serious injury if the assembly is not
done properly.
3. Install the seat (page 90 ).
92
Servicing Your Honda