Seat Removal
Refer to
Saf ety Precautions
The seat must be removed for battery,
main fuse and rear brake reservoir
maintenance, to use the helmet holder, to
access the tool kit and owner's manual, or
to lift the fuel tank.
(3)
(4)
(5)
(1) ignition key
(2) seat lock
(3) seat
90
Servicing Your Honda
on page
74
.
(6)
(7)
(2)
(1)
(4) front prongs
(5) front stays
(6) rear prongs
(7) rear stays
Removal
1.
Insert the ignition key ( ) into the seat
lock ( ).
2
2.
Turn it clockwise and pull up on the
rear of the seat ( ).
3
3.
Pull the seat back and up.
Installation
1.
Insert the front prongs ( ) into the front
stays ( ) and the rear prongs ( ) into
5
the rear stays ( ) on the frame.
7
2.
Push forward and then down on the rear
of the seat.
Be sure to securely lock the seat after
reinstalling it.
1
4
6