Fisher & Paykel OR48DDPWGX Installation Instructions Manual page 3
Hide thumbs
Also See for OR48DDPWGX:
- User manual (72 pages) ,
- Installation instructions manual (48 pages) ,
- User manual (70 pages)
Table of Contents
Advertisement
Available languages
Available languages
DATA PLATE
CONVERSION
LABEL
IMPORTANT
- PLEASE READ AND FOLLOW
¢" Before beginning,
please read these instructions
completely
and
carefully.
¢" Do not remove
permanently
affixed
labels, warnings,
or plates
from the product.
This may void the warranty.
¢" Please observe
all local and national
codes and ordinances.
¢" Please ensure
that this product
is properly
grounded.
J
The electrical
plug should
always
be accessible.
J" The installer
should
leave
these
instructions
with the consumer
who should
retain for local inspector's
use and for future
reference.
®
Installation
must conform
with local codes or in the absence
of codes, the National
Fuel Gas Code ANSIZ223.1
- latest edition.
Electrical
installation
must be in accordance
with the National
Electrical
Code, ANSI/NFPA70
- latest edition
and/or
local codes.
IN CANADA:
Installation
must
be in accordance
with the current
CAN/
CGA-B149.1
National
Gas Installation
Code
or CAN/CGA-B149.2,
Propane
Installation
Code
and/or
local
codes.
Electrical
installation
must be in accordance
with the current
CSA C22.1 Canadian
Electrical
Codes
Part 1 and/or
local codes.
INSTALLATION
IN MANUFACTURED
(MOBILE)
HOME: The installation
must conform
with the Manufactured
Home Construction
and Safety Standard,
Title 24 CFR, Part 3280 [formerly
the Federal
Standard
for Mobile
Home
Construction
and Safety,
Title 24, HUD (Part 280)] or, when
such standard
is not applicable,
the
Standard
for Manufactured
Home
Installations,
ANSI/NCSBCS
A225.1,
or with
local codes
where
appli-
cable.
INSTALLATION
IN RECREATIONAL
PARK TRAILERS:
The installation
must conform
with state or other codes
or, in the absence
of such codes,
with the Standard
for Recreational
Park Trailers, ANSI A119.5.
Installation
of any gas-fired
equipment
should
be made by a licensed
plumber.
A manual
gas shut-off
valve
must be installed
in the gas supply
line ahead of the appliance
in the gas stream
for safety and ease of ser-
vice.
If an external
electrical
source
is utilized,
the appliance,
when
installed,
must
be electrically
grounded
in
accordance
with local codes or, in the absence
of local codes,
with the national
Electrical
Code, ANSI/NFPA
70.
This range is supplied with a protective
film on steel and aluminium
parts:
This film must be removed
before
installing/using
the appliance.
I
FOR INSTALLER
ONLY
I
I
THIS RANGE IS FOR RESIDENTIAL USE ONLY
I
Advertisement
Table of Contents
