Usage of the Operation Buttons
Explanation of Buttons
Indicator mode and meaning
The indicator is off, indicating that the
program or mode is not selected
The indicator is on, indicating the program
or mode selected and about to run
Normal running mode
For setting, changing water level and manually
replenishing water. Water levels may be set at
beginning or pause.
During Soak, Wash or Rinse, press this button
to manually replenish water and release it to
stop. But this function is disabled when water
reaches overflow protection level.
Pushing the button to select the reserve washing
time from 2 hour to 24 hour.
During no delay, the Delay/ Start indicator is
off, the remaining time indicator is on, and
the nixie indicator displays the non-delayed
cycle remaining time.
Select following six automatic programs
with the button
Washing the cotton textile
Washing the bigger, thicker or
heavier dirty laundries
Quick washing of the light dirt
Washing the woollen textile
To imitate hand scrub
For selecting clothes soiled degree.
Wash cycle increases 2 minutes for a
next higher soiled degree and decreases
2 minutes for a next lower soiled degree.