Usage Of The Operation Buttons - Haier HWM110-9188DD User Manual

Usage of the Operation Buttons

Explanation of Buttons
G
F
Indicator mode and meaning
Off
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
Child lock function
The function is intended for children safety and preventing the washing program from accidental changes by children.
Push down the POWER button, set desired washing procedures, After setting ,push down the START/HOLD button, then
hold the PROCESS button and DELAY END button, The digitron displays"CL", The child lock function is activated.
All of the buttons are locked and can not make selection
Release the child lock function :push down the PROCESS button and DELAY END button at the same time for more
2 seconds .After a beep sound ,the child lock function is released.
REMAIN (MINUTES)
During working , it displays the remained reserve time (minute).In case of
trouble, it displays the abnormal symbol(see to page 16)
DELAY END(HOURS)
During reserve, it displays the remained reserve time (hour)
A "POWER" button
Push the "POWER" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "POWER" button to switch on the power. If the "START/HOLD" button is not pushed,
the machine will switch off the power automatically after 5 minutes.
B "START/HOLD"button
After the power is switched on, press it to start the machine.
During working, push it to pause.
During pause, push this button to restart and go on working.
REMAIN (MINUTES)
DELAY END(HOURS)
DELAY
END
CHILD
LOCK
E
Digital tube
D C
A
B
Page 16