Save One Mix Preset Via Midi; Saving All Mix Presets Via Midi - Aviom A-16R User Manual

Personal mixer and control surface
Hide thumbs Also See for A-16R:
Table of Contents

Advertisement

Aviom A-16 Personal Monitor Mixing System

Save One Mix Preset via MIDI

To save the current mix as a Preset via MIDI SysEx:
1.
Recall a Preset (or edit a Preset to create a new mix) including volume,
pan, mutes and groups for up to sixteen channels of audio as required.
Editing can be done from the front panel of the A-16R or from the
optional A-16CS.
2. Set the A-16R front panel Remote/Local switch to the L
On) position.
3.
Set up your MIDI recording device so that it is ready to receive MIDI
SysEx data.
4. Hold the R
While still holding the R
5.
button. (After pressing the S
and G
ROUP
6. The current mix is sent out from the A-16R to the MIDI recording
device as a data dump.
7.
Save your MIDI SysEx data to disk or other storage media used by
your MIDI recording device or software application.
When transmitting a single Preset, the sixteen yellow Mute LEDs will light solid
for the duration of the transmission to verify the send operation. For single preset
file dumps this will be relatively brief. (Note that there is no way that the A-16R can
know that the MIDI Preset data file was received properly by the device that the
transmission was intended for.)

Saving All Mix Presets via MIDI

To save the currently saved set of sixteen mix Presets as a single MIDI SysEx data
file:
1.
Make sure that the A-16R front panel Remote/Local switch is set to
the L
OCAL
2. Set up your MIDI recording device so that it is ready to receive MIDI
SysEx data.
Hold the A-16R front panel R
3.
Save Mode.
4. While still holding the R
button. (You can then release the R
5.
The contents of the internal memory of the A-16R is sent to the MIDI
recording device as a single data dump.
6. Save your MIDI SysEx data to disk or other storage media as used by
your MIDI recording device.
During the transmission of the Preset memory, the sixteen yellow Mute LEDs in the
Channel buttons will light solid for the duration of the SysEx transmission.
Note that only the sixteen saved Presets are transmitted as MIDI data. If you have
62
and G
ECALL
ROUP
ECALL
OLO
buttons.)
(MIDI On) position.
ECALL
buttons down to enter Save Mode.
and G
buttons, press the S
ROUP
button, you can release the R
and G
ECALL
ROUP
and G
buttons, press the M
ROUP
and G
ECALL
(MIDI
OCAL
OLO
ECALL
buttons down to enter
UTE
buttons.)
ROUP

Advertisement

Table of Contents
loading

This manual is also suitable for:

A-16cs

Table of Contents