Table of Contents
Advertisement
Data Storage
Two types of MIDI SysEx data can be generated by the A-16R, single preset
fi les and fi les that contain all sixteen user Presets.
The A-16R can send the following data types from the MIDI Out jack:
• Single Preset files - the current system settings including volume, pan,
mute, and group information are transmitted.
• All Preset files - the sixteen saved user Presets are transmitted as a
single data dump.
The A-16R can receive the following data types:
• Single Preset files - saved mix information is loaded into the current
mix state.
• All Preset files - the A-16R's current sixteen mix Presets are replaced
with the data from a set of sixteen saved Presets.
The A-16R is capable of saving and restoring Presets via MIDI only when the front
panel Remote/Local switch is in the L
communication is disabled.
Note: The MIDI Thru jack will always echo data appearing at the MIDI
In jack regardless of the position of the Remote/Local switch.
Saving Presets
The A-16R can save Preset information to the internal memory or via MIDI SysEx
any time it is in Save Mode. The A-16R Save Mode is entered by holding down the
R
and G
ECALL
ROUP
combination flashes the Recall and Group LEDs to indicate that you can save Presets.
To save a Preset to internal memory, you press a numbered Channel button to store
the current mix at the selected location.
To save a Preset or group of presets via MIDI, the S
combination with the R
buttons simultaneously. Holding the R
and G
ECALL
ROUP
position. In the R
OCAL
OLO
buttons.
position, MIDI
EMOTE
and G
ECALL
ROUP
and M
buttons are used in
UTE
button
61
Advertisement
Table of Contents
