Table of Contents
Advertisement
System Navigation
This section explains the basic layout of your new Aviom products. The diagrams
on the previous pages can be used as a quick visual guide to the location of the basic
components of the Personal Monitor Mixing System.
The A-16T Transmitter
A-16T Front Panel
The front panel of the A-16T contains the Channel information, Link switches,
Signal Present LEDs, Clip LEDs, Power indicator, Input Level switches, and the
A-Net output connector.
Channel LEDs
The numbered Channels on the A-16T front panel correspond to the sixteen analog
inputs on the rear section of the A-16T. They are grouped together in pairs — Chan-
nels 1 and 2, Channels 3 and 4, etc. Each Channel contains two LEDs, one showing
that there is an audio signal present, and another used to indicate that the input to a
channel is causing audio clipping. Signal and Clip LEDs appear directly beneath the
Channel numbers.
The lower LED, marked Signal, will light as long as an audio signal of at least -40dB
is present on the channel. It provides an easy way to confirm that audio is indeed
passing into—and being processed by—the A-16T.
The upper LED is marked Clip. It will light if a signal reaches a point that is within
3 dB of full scale (0dB). In general, you want to operate the system so that the Clip
LED lights only occasionally. If the LED is on constantly, you should either lower
the volume of the source audio coming into the A-16T or try different Input Level
settings.
Input Levels
The A-16 Personal Monitor Mixing System has been designed to accept a wide
range of professional and semi-professional audio levels. There are four Input Level
19
Advertisement
Table of Contents
