Table of Contents
Advertisement
Aviom A-16 Personal Monitor Mixing System
Balanced Inserts
The A-16R is equipped with a stereo insert that can be used just like the insert points
found in most mixing consoles. The audio signal from the A-16R can be sent out to
the inputs of an audio processor (such as a compressor or limiter). The signal, once
processed by the device, is then returned to the A-16R via the Return jacks.
The inserts on the A-16R are balanced. You can use either balanced or unbalanced
audio processors with the A-16R.
Audio from the A-16R is sent to the effect device's inputs. The processed sound is
heard when the signal from the effect is plugged into the A-16R Insert Return jacks.
The audio signal will not be interrupted when a cable is patched into the Insert Send
jack. You can use the Insert Send jacks as an additional pair of audio outputs as long
as no cables are connected to the Return jacks.
Plugging a cable into the Return jack will interrupt the signal heard in the mix
outputs (headphones and rear-panel line outputs) and will complete the signal path.
Note: The insert Send/Return loop includes the auxiliary Mix In signal in the
processing path.
32
Advertisement
Table of Contents
