Washing Sequence - Haier HWM70-113S User Manual

Washing sequence

Wash selector
(standard current,
strong current)
Wash timer
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
OFF
WASH TIMER
Wash
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2
4.Select the washing time
Select the washing time according to the
laundries. (Figure 3)
5.After washing, Set the "WASH SELECTOR" at
"DRAIN". (Figure4).
8
Spin water-filling entrance
STRONG
STANDARD
DRAIN
WASH SELECTOR
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SPIN TIMER
Figure 1
STRONG
STANDARD
WASH SELECTOR
Figure 2
OFF
WASH TIMER
Figure 3
STRONG
STANDARD
DRAIN
WASH SELECTOR
Figure 4
DRAIN