Washing Sequence - Haier HWM95-987S User Manual

Washing sequence

Water inlet
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Wash timer
(To set to below 2 minute,
first set to 6 minute then
turn it back. it can increase
the service life of the timer).
OFF
WASH TIMER
Wash selector
(standard current,
strong current)
STRONG
Ç ¿ Ï ´
STANDARD
± ê × ¼
Å Å Ë ®
WASH SELECTOR
WASH SELECTOR
WASH TIMER
WASH SELECTOR
8
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
DRAIN
SPIN TIMER
WASH SPIN
STRONG
Ç ¿ Ï ´
STANDARD ± ê × ¼
Å Å Ë ®
DRAIN
OFF
STRONG
Ç ¿ Ï ´
STANDARD
± ê × ¼
Å Å Ë ®
DRAIN
Figure 2
Figure 3
Figure 4
Figure 5