Washing Sequence - Haier HWM105-M186 Owner's Manual

Washing sequence

Washing
1.Inlet selector
Set the selector to "WASH".(Figure1)
2.Add water
Machine begins to dispense detergent uniformly.(Figure2)
3.Put in the wash load. Add more water as
necessary.(Figure3)
4.Select intensity.
Select "SOFT" or "STANDARD" water flow
intensity according to the wash load.(Figure4)
5.Select wash time.
Select wash time according to the wash load. (Figure5)
The washing instruction with soaking:
a.0-15 minutes is normal washing;
b.15-45 minutes is sport soaking and the pulsator will run 2.5 minutes
each 7.5 minutes interval, until sport soaking is end, finally it is
15 minutes normal washing;
c.When the user select the soaking, firstly make sure the detergent
powder is fully dissolved. Otherwise it may be harmful to clothing.
6.After the wash is completed, set the switch to the
"DRAIN" position.(Figure6)
10
TOR
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6