Plumbing Installation - Electrolux ICON E24CM75GSS Installation Instructions Manual

Built-in coffee maker
Hide thumbs Also See for ICON E24CM75GSS:
Table of Contents

Advertisement

12
Installation
PLUMBING INSTALLATION
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
II
[]
[]
[]
[]
[]
[]
[]
[]
CAUTION
To prevent damage to the coffee maker due to hard water, prior to
installation
check the water hardness for the building
where you will be
installing the coffee maker. If necessary have a qualified
water treatment
specialist install a water treatment
system. The water treatment
system
must be installed between the house plumbing
and the coffee maker.
Determine Water Hardness
Before
installing
the coffee
maker,
determine
the water
hardness.
Call the local
water
company.
Ask them for the water
hardness
level of the water
supplied
to the
building
where
the
coffee
maker
will
be installed.
For Model E24CM75GSS (Tank Model):
If the water hardness
level is above four grains per gallon (4 gpg) you must
use filtered
water with a hardness
of 4 gpg or less. Do not use distilled
water.
If the water hardness
level is below 4 gpg, you may use tap water in the
coffee
system.
Filtered water is recommended
for better taste.
For Model E24CM76GSS (Plumbed
Model):
If the water hardness
is above
4 grains
per gallon (4gpg) contact
a qualified
water treatment
specialist.
Have a water treatment
system
installed
that
lowers the water
hardness
level to 4 gpg or less.
Regardless
of the type of water treatment
system
installed,
ELECTROLUX
HIGHLY
RECOMMENDS
you install an Electrolux
ACCFILT-24
filter system.
The coffee maker requires
periodic
decalcification
that must be performed
regardless
of the water hardness
level. The filter head in the kit is required
to
perform
this process
for model
E24CM76GSS.
Decalcification
will be MUCH
SIMPLER
with the Electrolux
ACCFILT-24
filter system
already
installed.
In
addition,
the filter will improve
water taste.
Electrolux
does not recommend
installation
of a reverse
osmosis
filtration
system.
Reverse
osmosis
systems
can cause low water pressure.
When
the
water pressure
is low, the coffee water volume
level) can fluctuate
and the
water pump may make a "hammering"
sound.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icon e24cm76gss

Table of Contents